3 Tests and Diagnostics

3.31 SETUP

When “Enabled” is selected, the following sub-window appears.

KEYBOARD

Ext Keyboard "Fn" key equivalent

= Left Ctrl + Left Alt

Use this option to set a key combination on an external keyboard to emulate the Fn key on the computer’s internal keyboard. Setting a Fn key equivalent will enable you to use “Hotkeys” by pressing the set combination in place of the Fn key. The following items can be selected for this option:

Left Ctrl + Left Alt*

Right Ctrl + Right Alt*

Left Alt + Left Shift

Right Alt + Right Shift

Left Alt + Caps Lock

*If these selections are made, you cannot warm boot the system by pressing Ctrl + Alt + Del.

(c)Parallel Port Mode

The option selects Parallel Port Mode.

ECP

Sets the port mode to ECP (Extended Capabilities Port).

 

For most printers, the port should be set to ECP. (Default)

Std. Bi-Direct.

Sets the bi-directional setting. This setting should be used

 

with some other parallel devices.

15.Legacy Emulation.

(a)USB KB/Mouse Legacy Emulation.

This option sets the Legacy support condition of the USB keyboard and the USB mouse.

Enabled

USB Legacy Support can be used. (Default)

 

USB keyboard/USB mouse are available without a driver.

Disabled

USB Legacy Support cannot be used.

(b)USB-FDD Legacy Emulation.

This option sets the Legacy support condition of the USB floppy disk drive.

Enabled

USB Legacy Support can be used. (Default)

 

USB floppy disk is available without the driver.

Disabled

USB Legacy Support cannot be used.

3-116

[CONFIDENTIAL]

TECRA S3 Maintenance Manual (960-532)

Page 234
Image 234
Toshiba S4 manual Ecp, Std. Bi-Direct