Toshiba S4 Replacement Procedures LCD unit/FL inverter, Removing the LCD unit/FL inverter

4 Replacement Procedures 4.24 LCD unit/FL inverter

4.24 LCD unit/FL inverter

Removing the LCD unit/FL inverter

To remove the LCD unit/FL inverter, follow the steps below and refer to Figure 4-41 to 4-47.

1.Peel off two mask rubbers and two mask seals and remove the following screws securing the display mask.

•	M2.5⋅4B	FLAT HEAD screw	⋅2
•	M2⋅4B	S-FLAT HEAD screw	⋅2

2. Remove the display mask while releasing the latches.

Mask rubber

Mask seal

M2⋅4B S-FLAT HEAD

M2.5⋅4B FLAT HEAD

Mask seal

M2.5⋅4B FLAT HEAD

Display mask

Figure 4-41 Removing the display mask

4-58 [CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)