Toshiba S4 manual Replacement Procedures Bluetooth module, Installing the Bluetooth module

4 Replacement Procedures 4.11 Bluetooth module

Installing the Bluetooth module

To install the Bluetooth module, follow the steps below and refer to Figure 4-16.

1.Connect the Bluetooth cable to the connector on the Bluetooth module and set the Bluetooth module to the slot in place.

2.Connect the Bluetooth cable to the connector CN4400 on the system board.

3.Connect the Bluetooth antenna cable to the connector on the Bluetooth module.

4-28 [CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)