4.30 Fluorescent Lamp

4 Replacement Procedure

4.30.2 Replacing the 15.0-inch XGA Sharp Fluorescent Lamp

CAUTION: When replacing the fluorescent lamp, wear finger covers or gloves to avoid contaminating or damaging the LCD panel. Be careful not to let dust or other foreign substance into the module.

Removing the 15.0-inch XGA Sharp fluorescent lamp

To remove the 15.0-inch XGA Sharp Fluorescent Lamp, follow the steps below and refer to Figures 4-65 to 4-74.

1.Turn the LCD module face down, and remove the protection cover SC (A), protection cover G (B) and two fixing tapes (C) and (D).

CAUTION: 1) Be careful not to damage the TCP and chip.

2)Discard the tapes(A, C, D) removed.

3)The protection cover G (B) is reused. Do not peel off the place sticked to the bezel.

(D)

(A)

(B)

(C)

Figure 4-65 Replacing Sharp fluorescent lamp (XGA) (1)

TECRA S3 Maintenance Manual (960-532)

[CONFIDENTIAL]

4-85

Page 327
Image 327
Toshiba S4 manual Replacing Sharp fluorescent lamp XGA