3.29 LAN/Modem/Bluetooth/IEEE1394 Test Program | 3 Tests and Diagnostics |
Table
Error code | Meaning |
0x20 | Unsupported LMP Parameter Value. |
0x21 | Role Change Not Allowed. |
0x22 | LMP Response Timeout. |
0x23 | LMP Error Transaction Collision. |
0x24 | LMP PDU Not Allowed. |
0x25 | Not Exist |
0x26 | Not Exist |
0x27 | Not Exist |
0x28 | Not Exist |
0x29 | Not Exist |
0x2a | Not Exist |
0x2b | Not Exist |
0x2c | Not Exist |
0x2d | Not Exist |
0x2e | Not Exist |
0x2f | Not Exist |
** See the Specification of the Bluetooth System in detail.
Subtest03 | Communications test (DUT mode) |
Subtest T | Communications test (TEST mode) |
| This subtest checks the Bluetooth communication functions. Set the responder |
| machine to DUT mode and tester machine to TEST mode. |
| Insert a floppy disk containing the test program into the responder machine |
| and turn on the power. The Bluetooth test menu will appear. |
| Press 3 to select the test and press Enter of the responder machine. The |
| following message will appear: |
TECRA S3 Maintenance Manual | [CONFIDENTIAL] |
