
| 4 Replacement Procedures | |
Figure | Removing the USB board | |
Figure | Removing the internal microphone | |
Figure | Removing the SR | |
Figure | Connecting the SR/USB cable | |
Figure | Removing the fan | |
Figure | Removing the CPU heat sink | |
Figure | Removing the CPU | |
Figure | Applying silicon grease | |
Figure | Removing the GPU heat sink | |
Figure | Removing the GFX board | |
Figure | Removing the HDD cable holder | |
Figure | Removing the modem jack | |
Figure | Removing the HDD cable | |
Figure | Removing the PC card slot | |
Figure | Removing the north bridge IC heat sink | |
Figure | Removing the FP board | |
Figure | Removing the display mask | |
Figure | Removing the FL inverter | |
Figure | Removing the LCD unit (1) | |
Figure | Removing the LCD unit (2) | |
Figure | Removing the LCD bracket | |
Figure | Peeling off the insulator | |
Figure | Removing the LCD cable holder | |
Figure | Removing the cover latch | |
Figure | Removing the wireless LAN antenna cable | |
Figure | Removing the wireless LAN antenna/Bluetooth antenna | |
Figure | separating the display cover and middle frame | |
Figure | Removing the hinge (right) | |
Figure | Removing the hinge (left) | |
Figure | Removing the speaker | |
Figure | Removing the battery slider A | |
Figure | Removing the battery slider B |
TECRA S3 Maintenance Manual | [CONFIDENTIAL] |