
3 Tests and Diagnostics | 3.2 Executing the Diagnostic Test |
Set the highlight bar to 1, and press Enter. The following DIAGNOSTIC TEST MENU will appear:
TOSHIBA personal computer XXXXXX DIAGNOSTICS version X.XX (c) copyright TOSHIBA Corp. 20XX
DIAGNOSTIC TEST MENU :
1 | - SYSTEM TEST |
2 | - MEMORY TEST |
3 | - KEYBOARD TEST |
4 | - DISPLAY TEST |
5 | - FLOPPY DISK TEST |
6 | - PRINTER TEST |
7 | – ASYNC TEST |
8 | - HARD DISK TEST *[There is a second hard disk] |
9 | - REAL TIMER TEST |
10 | - NDP TEST |
11 | - EXPANSION TEST |
12 | - |
88 | - ERROR RETRY COUNT SET [FDD & HDD] |
99 | - EXIT TO DIAGNOSTICS MENU |
NOTE: When the two HDD are mounted, the message of [There is a second hard disk] is displayed.
Functions 1 through 12 are the Diagnostic Tests. Function 88 sets the floppy disk drive and hard disk drive error retry count
To exit the submenu of the Diagnostic Test and returns to the Diagnostics Menu, set the highlight bar to function 99 and press Enter.
[CONFIDENTIAL] | TECRA S3 Maintenance Manual |