4.17 Internal microphone4 Replacement Procedures
4.17 Internal microphone Removing the Internal microphone
To remove the internal microphone, follow the steps below and refer to Figure
1. Remove the following screws and front panel.
• M2.5⋅6S Tapping screw | ⋅2 |
2.Disconnect the microphone cable from the connector CN6050 on the system board.
3.Take out the internal microphone from the slot of the front panel.
M2.5⋅6S Tapping
Microphone
Front panel
Microphone cable
M2.5⋅6S Tapping |
|
CN6050 |
Figure4-26 Removing the internal microphone
TECRA S3 Maintenance Manual | [CONFIDENTIAL] |