Toshiba S4 manual Hdd

3.31 SETUP 3 Tests and Diagnostics

(c)USB-FDD Legacy Emulation.

This option sets the type of the USB memory as a startup device.

HDD	Sets the type of the USB memory to be equivalent to the
	HDD (Default).
Disabled	Sets the type of the USB memory to be equivalent to the
	FDD.

16.PCI LAN

This option enables/disables the Built-in LAN functions.

(a)Built-in LAN

Enabled	Enables Built-in LAN functions. (Default)
Disabled	Disables Built-in LAN functions.

17.RAID ARRAY

This option sets the RAID configuration.

(a)Current State

This option indicates the current hard disk condition. Content set in [Create State] is displayed, when booting BIOS setup next time.

Built in HDD Displays RAID configuration level of the built-in HDD. Second HDD Displays RAID configuration level of the second HDD.

(b)Create State

This option sets the RAID configuration level.

NOTE: All data of the hard disk is deleted when setting of the RAID configuration is changed in the BIOS setup.

Therefor, it is recommended that the user password or the supervisor password is registered to prevent changing of setting the RAID configuration by the third party.

Moreover, registering the supervisor password can make add the restriction so that a user without the management authority can not change the setting of the BIOS setup.

Built in HDD Sets RAID configuration level of the built in HDD.

Second HDD Sets RAID configuration level of the second HDD.

TECRA S3 Maintenance Manual (960-532) [CONFIDENTIAL] 3-117