
3.21 ONLY ONE TEST | 3 Tests and Diagnostics |
Subtest 0A Acceleration sensor
This subtest detects and corrects the each axis (X, Y, Z).
NOTE: Make sure that this subtest is executed on the following condition:
1.Flat desk with vertical plane to get the stability of machine.
2.Prevent the machine from shake or shock.
<Example>
Set the machine
against the vertical planeVertical plane with the Front upward
Flat desk
The figure below shows the name and position of each side.
Top
(heaven surface)
Back
Right side
Left side | Front |
TECRA S3 Maintenance Manual | [CONFIDENTIAL] |