3 Tests and Diagnostics

3.5 Heatrun Test

3.5Heatrun Test

To execute this program, select 3-Repair heatrun in the startup menu, press Enter.

When selecting the option you want to execute, the message shown below will appear and 01-ROM Checksum of the SYSTEM test will be executed.

SYSTEM TEST NAME

XXXXXX

xxxxxxxDIAGNOSTIC TEST VX.XX [Ctrl]+[Break] : test end

[Ctrl]+[C]

: key stop

SUB-TEST

: XX

 

 

PASS COUNT : XXXXX

ERROR COUNT

: XXXXX

WRITE DATA

: XX

READ DATA

: XX

ADDRESS

: XXXXXX

STATUS

: XXX

After selecting this test, the same subtests as 3.24 Running Test are executed successively. For more details on the procedure and test content, refer to Running Test.

When the heatrun test ends, following message appears in the display.

************************************************

HEATRUN TEST END

************************************************

Press any key to continue...

Press any key and return to the startup menu.

NOTE: The test result (Errorlog.txt) is stored in the floppy disk. The result is displayed in the same format as Log Utilities. For more details of the format, refer to 3.23 Log Utilities.

3-20

[CONFIDENTIAL]

TECRA S3 Maintenance Manual (960-532)

Page 138
Image 138
Toshiba S4 manual Tests and Diagnostics Heatrun Test