3 Tests and Diagnostics

3.2 Executing the Diagnostic Test

3.2Executing the Diagnostic Test

To start the DIAGNOSTIC PROGRAM, follow these steps:

1.Insert the Diagnostics disk in the USB floppy disk drive.

2.Turn on the computer with pressing the F12. Select the FDD in the display for selecting booting unit. Then, press Enter and the following menu appears.

Microsoft Windows XX Startup Menu

---------------------------------------------------------

1.Repair Main (T&D)

2.Repair initial config set

3.Repair Heatrun (T&D)

Enter a choice: 1

Select the program you want to execute and press Enter. The RAID configuration check screen will be displayed. Refer to 3.3 RAID configuration Check.

When any key is pressed, the RAID configuration check screen is completed and the program selected is executed.

To start the Diagnostics menu (T&D), press 1 and Enter.

To start the H/W initial information setting tool, press 2 and Enter.

To start the Heatrun test, press 3 and Enter.

NOTE: After replacing the system board or CPU, it is necessary to execute the subtest 01 Initial configuration in 3.4 Setting of the hardware configuration.

3-4

[CONFIDENTIAL]

TECRA S3 Maintenance Manual (960-532)

Page 122
Image 122
Toshiba S4 manual Tests and Diagnostics Executing the Diagnostic Test