
2 Troubleshooting Procedures | 2.14 Wireless LAN Troubleshooting |
2.14 Wireless LAN Troubleshooting
This section describes how to determine if the computer’s Wireless LAN is functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required.
Procedure 1:
Procedure 2: Antenna Connection Check
Procedure 3: Replacement Check
Procedure 1 Transmitting-Receiving Check
Before starting the test, make sure the wireless communication switch is set in the “ON” position.
Refer to Chapter 3, Tests and Diagnostics for more information on how to perform the test program.
Check 1 Execute the test program for the wireless LAN function to check the transmitting- receiving function of the wireless LAN. You will need a second computer that can communicate by the wireless LAN.
If the computer passes the test, the function is correctly working. If the computer does not pass the test, perform Procedure 2.
[CONFIDENTIAL] | TECRA S3 Maintenance Manual |