4 Replacement Procedures | 4.15 Modem Daughter Card (MDC) |
Installing the Modem Daughter Card (MDC)
To install the modem daughter card, follow the steps below and refer to Figure
1.Turn up the insulator (cable holder) and connect the modem cable to the connector CN3011 on the system board. Stick the glass tape on the cable.
2.Turn up the insulator and install the modem jack to the slot.
|
|
|
| Glass tape |
|
|
|
|
|
|
|
|
| Modem jack | |
Insulator |
|
| |||||
|
| Insulator |
|
| |||
(cable holder) |
|
|
|
| |||
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Modem cable |
|
|
|
| ||
|
|
|
|
|
|
|
|
CN3011
Figure 4-24 Installing the modem jack and modem cable
3.Connect the modem cable to the connector on the modem daughter card.
4.Seat the modem daughter card in place and press carefully on the card to connect it to the connector CN3010 on the system board. Be careful not to damage the card and connector.
5.Secure the modem daughter card with the following screws.
• M2⋅4B | BIND screw | ⋅2 |
[CONFIDENTIAL] | TECRA S3 Maintenance Manual |
