Toshiba S4 manual Replacement Procedures System board, Removing the System board

4 Replacement Procedures 4.22 System board

4.22 System board

Removing the System board

To remove the system board, follow the steps below and refer to Figure 4-35 to 4-39. 1. Remove the following screw and HDD cable holder.

• M2.5⋅6S Tapping screw⋅1

2. Take out the HDD cable of the HDD connector side from the slot.

M2.5⋅6S Tapping

HDD cable holder

HDD cable

Figure 4-35 Removing the HDD cable holder

4-52 [CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)