4 Replacement Procedures 4.12 Switch membrane
4-30 [CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)
Installing the Switch membrane
To install the switch membrane, follow the steps below and refer to Figure 4-17.
1. Install the switch membrane in place and secure it with the following screw.
• M2.5×4B FLAT HEAD screw x1
2. Connect the switch cable to the connector CN3260 on the system board.
3. Slide the switch cover to the below to install and secure it with the following screw.
• M2.5×4B FLAT HEAD screw x1