4.6 HDD

4 Replacement Procedures

NOTE: The following steps describe how to disassemble the HDD assembly; however, do not disassemble if the HDD is working properly.

3. Place the HDD assembly on a flat surface, and remove the following screws.

• M3⋅4S FLAT HEAD screw

⋅4

4. Separate the HDD and the HDD bracket.

CAUTION: Do not apply pressure to the top or bottom of the HDD.

M34S FLAT HEAD

HDD bracket

M34S FLAT HEAD

HDD

Figure 4-6 Separating the HDD

TECRA S3 Maintenance Manual (960-532)

[CONFIDENTIAL]

4-15

Page 257
Image 257
Toshiba S4 manual HDD Replacement Procedures, Separating the HDD