4 Replacement Procedures

4.20 LCD Unit/FL Inverter

3. Remove the following screw fixing the FL inverter.

• M2x4Z

SUPER THIN BIND screw x1

4.Peel off the insulators in the HV cable side and disconnect two cables from the FL inverter. Remove the FL inverter.

5.Remove the following screws fixing the LCD unit.

• M2x4Z

SUPER THIN BIND screw x4

6.With the bottom edge of the LCD unit resting on the display cover, raise the top edge of the LCD unit. Peel off the cupper tape and disconnect the LCD harness from the connector on the back of the LCD.

7.Remove the LCD unit from the display cover.

 

Cupper Tape

M2x4Z SUPER THIN BIND

FL Inverter

Insulator1

 

LCD harness

Insulator2

HV cable

M2x4Z SUPER THIN BIND

M2x4Z SUPER THIN BIND

Figure 4-41 Removing FL Inverter and LCD Unit

4-58

[CONFIDENTIAL]

Satellite A50S/TECRA A3X Maintenance Manual (960-534)

Page 280
Image 280
Toshiba A3X manual Replacement Procedures LCD Unit/FL Inverter, Removing FL Inverter and LCD Unit