3 Tests and Diagnostics

3.31 SETUP

Available

Enable the Execute-Disable Bit function.

Not Available

Disable the Execute-Disable Bit function.

(c) Auto Power On

 

This option displays setting for Auto Power On.

Disabled

Indicates auto power on is not set.

Enabled

Indicates auto power on is set.

When “Enabled” is selected, the following sub-window appears.

 

OPTIONS

 

 

 

 

 

=

00:00:00

 

Alarm

Time

 

Alarm

Date Option

=

Disabled

 

 

 

 

 

 

Set the parameters for the Auto Power On (automatic power on) function in the “OPTIONS” window. To set the time, use Space or BackSpace. Press

to move the cursor to the right and ↑ to move the cursor to the left when you set the date and time.

For the Alarm Time, set the time to turn on the power automatically. The “second” cannot be set. When it is set to “Disabled”, the time to turn on automatically is not set.

For the Alarm Date Option, set the date to turn on the power automatically. When it is set to “Disabled”, the time to turn on automatically is not set.

NOTE: 1. Do not remove the AC adaptor and battery pack at the same time when you use this feature. If you do so, data saved by the resume function will be lost. You must also reset this option.

2.If you have set a password and the computer boots by the Auto Power On function and Standby is on, the computer will start with the instant security function enabled. The password = message is not displayed; however, you must enter the password to use the computer.

3.This option is enabled only once, the setting is reset, after booting up.

(d) Diagnostic Mode

This option enables/disables the HW Diagnostic test function.

Disabled

Disables the HW Diagnostic test function. (Default)

Enabled

Enables the HW Diagnostic test function.

(e) Language During Bootup

Satellite A50S/TECRA A3X Maintenance Manual (960-534)

[CONFIDENTIAL] 3-101

Page 211
Image 211
Toshiba A3X manual Enable the Execute-Disable Bit function, Disable the Execute-Disable Bit function, Auto Power On