4.22 Wireless LAN Antenna/Speaker/Hinge

4 Replacement Procedures

Installing the Wireless LAN antenna/Speaker/Hinge

The following describes the procedure for installing the wireless LAN antenna, speaker and hinge (See Figure 4-44 to 4-52).

CAUTION: When installing the speakers, be careful not to touch the metal part of the speakers. It might damage the speakers.

1. Install the hinges to the display assembly and secure them with the following screws.

• M2.5x4B THIN BIND screw

x3 (Right:1, Left: 2)

2. Attach sponges on both the side of each speaker.

Left Speaker

Right Speaker

Sponge

Sponge

Figure 4-52 Attaching sponges

3.Set the left speaker on the base assembly. Pass the left speaker cable (blue) along the guide on the front of the display assembly and run toward the back side. Secure the cable with four insulators.

4.Set the right speaker on the base assembly and pass the right speaker cable (red) toward the back side of the base assembly.

5.Arrange the speaker cables (blue and red) along the guides. Pass the cables under the insulator and secure them with accetate tapes. Insert the insulator end under the hinge.

Satellite A50S/TECRA A3X Maintenance Manual (960-534)

[CONFIDENTIAL]

4-69

Page 291
Image 291
Toshiba A3X manual Installing the Wireless LAN antenna/Speaker/Hinge, Attaching sponges