Toshiba A3X manual Installing the memory module

4.3 Memory Module 4 Replacement Procedures

Installing the memory module

Before installing the memory module, confirm that the computer is not in stanby mode or hibernation mode. Then perform the following procedure (See Figure 4-3, 4-4).

1.Insert the memory module into the connector of the computer slantwise (terminal side first) and press it to connect firmly.

CAUTION:The power must be turned off when you insert a memory module. Inserting a memory module with the power on might damage the module or the computer itself.

When installing only one memory module, install it SLOT A. Otherwise, it might damage the module or the computer itself

When installing a memory module, confirm that left anf right latches are firmly locked a memor module.

2.Install the memory slot cover from the front side edge and secure it with the supplied screw.

3.When the power of the computer is turned on, the computer checks automatically the memory size. Confirm that the new memory is detected correctly.

4.If the memory is not detected, make sure it is connected surely.

Satellite A50S/TECRA A3X Maintenance Manual (960-534) [CONFIDENTIAL] 4-13