4.15 System Board/DC-IN Jack/RTC Battery

4 Replacement Procedures

4.15 System Board/DC-IN Jack/RTC Battery

CAUTION: When handling the system board, always hold by the edges. Do not touch the printed circuit face.

After replacing the system board with a new one, update the DMI information as described Chapter 3. Also update with the latest BIOS as described in Appendix G “BIOS/KBC/EC Update”.

Removing the system board/DC-IN jack/RTC battery

The following describes the procedure for removing the system board/DC-IN jack/RTC battery (See Figure 4-32, 4-33).

1.Open insulators bundle the LAN harness, Modem harness and RTC battery.

2.Pull out the RTC battery from the RTC battery case.

Modem harness

LAN harness

RTC Battery Case

Figure 4-32 Opening the insulators

Satellite A50S/TECRA A3X Maintenance Manual (960-534)

[CONFIDENTIAL]

4-47

Page 269
Image 269
Toshiba A3X manual System Board/DC-IN Jack/RTC Battery Replacement Procedures