Toshiba A3X manual Replacement Procedures 14 Fan, Removing the Fan, Installing the Fan

4 Replacement Procedures 4.14 Fan

4.14 Fan

Removing the Fan

The following describes the procedure for removing the fan (See Figure 4-31).

1.Disconnect the fan cable from the connector CN8770 on the system board.

2.Remove the following screws and remove the fan by raising it up.

• M2.5x4B THIN BIND screw	x2
M2.5x4B THIN BIND

CN8770

Fan

Figure 4-31 Removing Fan

Installing the Fan

The following describes the procedure for installing the fan (See Figure 4-31).

1.Connect the fan cable to the connector CN8770 on the system board.

2.Install the fan on the base assembly and secure it with the following screws.

• M2.5x4B THIN BIND screw x2

4-46 [CONFIDENTIAL] Satellite A50S/TECRA A3X Maintenance Manual (960-534)