4 Replacement Procedures

4.17 Battery Latch

Installing the Battery latch

The following describes the procedure for installing the battery latch (See Figure 4-35, 4-36).

1.Set the spring to the battery lock L and install it on the base assembly.

2.Install the SB latch button from the bottom of the base assembly and snap their projections to the battery lock L. When installing the button, make sure the triangle mark on the back side is located in the indicated position. After installation, slide the latch on the bottom of the base assembly to make sure it works properly.

4-52

[CONFIDENTIAL]

Satellite A50S/TECRA A3X Maintenance Manual (960-534)

Page 274
Image 274
Toshiba A3X manual Replacement Procedures Battery Latch, Installing the Battery latch