Toshiba A3X manual Replacing 15.0 Inch Sharp fluorescent lamp XGA

4.23 Fluorescent Lamp 4 Replacement Procedures

4.23.2Replacing the 15.0 Inch XGA Sharp Fluorescent lamp Disassembling the 15.0 Inch XGA Sharp Fluorescent lamp

To disassemble the 15.0-inch XGA Sharp fluorescent lamp, follow the steps below and refer to Figures 4-62 to 4-71.

1.Turn the LCD module face down, and remove the protection cover S (A), protection cover G (B), fixing tape (C) and fixing tape for lead wire (D).

NOTE: 1) Be careful not to damage the TCP or chips.

2) The protection cover G is reused. Discard the other tapes removed.

(A)Protection cover S

(C)Fixing tape

(B)Protection cover G

(D)Fixing tape for lead wire

Figure 4-62 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (1)

Satellite A50S/TECRA A3X Maintenance Manual (960-534) [CONFIDENTIAL] 4-81