Toshiba A3X manual Executing the Diagnostic Test Tests and Diagnostics, Diagnostics menu T&D

3.2 Executing the Diagnostic Test 3 Tests and Diagnostics

3.2Executing the Diagnostic Test

To start the DIAGNOSTIC PROGRAM, follow these steps:

1.Insert the Diagnostics disk in the floppy disk drive.

2.Release the lock of the power switch and turn on the computer with pressing the F12. Select the FDD in the display for selecting booting unit. Then, press Enter and the following menu appears.

Microsoft Windows XX Startup Menu

---------------------------------------------------------

1.Repair Main (T&D)

2.Repair initial config set

3.Repair Heatrun (T&D)

Enter a choice: 1

To start the Diagnostics menu (T&D), press 1 and Enter .

To start the H/W initial information setting tool, press 2 and Enter.

To start the Heatrun test, press 3 and Enter.

3.2.1 Diagnostics menu (T&D)

After pressing 1 and Enter in the startup menu, the following menu appears.

TOSHIBA personal computer XXXXXX DIAGNOSTICS version X.XX (c) copyright TOSHIBA Corp. 20XX

DIAGNOSTICS MENU :

1 - DIAGNOSTIC TEST

2 – ONLY ONE TEST

3-

4- HEAD CLEANING

5- LOG UTILITIES

6- RUNNING TEST

7- FDD UTILITIES

8- SYSTEM CONFIGURATION

9- EXIT TO MS-DOS

3-4 [CONFIDENTIAL] Satellite A50S/TECRA A3X Maintenance Manual (960-534)