4.13 Parallel port board / Serial port board / S-Video board

4 Replacement Procedures

4.13 Parallel port board / Serial port board / S-Video board

Depending on the model, the machine has a different type board (Parallel port board / Serial port board / S-Video board). Refer to the proper procedures below.

4.13.1 Parallel port board

Removing the Parallel port board

The following describes the procedure for removing the Parallel port board (See Figure 4-27, 4-28).

1.Remove the DC-IN jack and core from the slot of the base assembly.

2.Remove the following screws to remove the harness holder.

• M2.5x4B THIN BIND screw

x2

M2.5x4B THIN BIND

DC-IN Jack

Harness Holder

Figure 4-27 Removing Harness Holder

Satellite A50S/TECRA A3X Maintenance Manual (960-534)

[CONFIDENTIAL]

4-39

Page 261
Image 261
Toshiba A3X Parallel port board / Serial port board / S-Video board, Parallel port board Removing the Parallel port board