Toshiba A3X Display Assembly Replacement Procedures, Removing screws and cables under keyboard

4.11 Display Assembly 4 Replacement Procedures

3.Turn the computer face up. Open the display and disconnect the speaker cables (Blue, Red) from the connectors on the system board. Unlock the connector and disconnect the touch pad cable from the system board.

4.Remove the following screw securing the LCD harness hold plate and remove the LCD harness hold plate. Disconnect the LCD harness from the connector CN5000 on the system board.

• M2.5x8B THIN BIND screw x1

5. Remove the following screws securing the display assembly.

•	M2x8B		BIND screw		x1
•	M2.5x8B		THIN BIND screw		x1
M2.5x8B THIN BIND		M2x8B BIND		M2.5x8B	THIN BIND

Glass tape

LCD harness hold plate

Right Speaker Cable (Connected to CN6002)

CN3240
Touch Pad Cable	Left Speaker Cable
	(Connected to CN6001)

Figure 4-24 Removing screws and cables (under keyboard)

Satellite A50S/TECRA A3X Maintenance Manual (960-534) [CONFIDENTIAL] 4-35