Toshiba A3X manual LCD Display Stretch

3 Tests and Diagnostics 3.31 SETUP

CD-ROM→LAN→FDD→HDD:The computer looks for bootable files in the following order: CD-ROM, LAN, FDD and HDD.

HDD→FDD→CD-ROM→LAN:The computer looks for bootable files in the following order: HDD, FDD, CD- ROM and LAN. (Default)

(*1) CD-ROM refers to a Optical Disk Drive.

(b)HDD Priority

Use this option to set the booting priority from HDD. Built in HDD→USB (Default)

:detecting boot-command from Built in HDD USB →Built in HDD

:detecting boot-command from USB memory

(c)Network Boot Protocol

Use this option to set the starting method via a network. PXE Sets to PXE protocol. (Default)

RPL Sets to RPL protocol.

7.Display

This group of options configures the computer’s display.

(a)Power On Display

This option is used to select the display when booting up.

Auto-SelectedSelects an external monitor if one is connected. Otherwise it selects the internal LCD. (Default)

LCD+AnalogRGB Selects both the internal LCD and the external CRT for simultaneous display.

NOTE: When starting the computer in Standby or Hibernation, the last configuration is remembered. If data does not appear on the display you are using after starting in Standby or Hibernation, pressing Fn+F5.

Pressing Fn+F5 changes the display setting as follows in order: the internal LCD, the external display, both the internal LCD and the external display.

When an external display, which does not support SVGA mode is connected and “LCD+AnalogRGB” is selected, the external display is not displayed.

(b) LCD Display Stretch

Satellite A50S/TECRA A3X Maintenance Manual (960-534) [CONFIDENTIAL] 3-99