4 Replacement Procedures

4.22 Wireless LAN Antenna/Speaker/Hinge

6.Install the optical drive cover and secure it with the following screws. When installing, insert the “A” portion (in the figure) first.

M2.5x2.8B U-THIN BIND screw x3

• M2.5x4B

THIN BIND screw x2

7.Install the display cover on the display assembly. Secure the hinges and the display cover with the following screws.

M2.5x6C

PSP TIGHT screw

x4

M2x5C

SUPER THIN screw

x2

8.Fit the wireless LAN antennas to the lines on the back side of the display cover. Pass the wireless LAN antenna cables and secure them with eight glass tapes.

[If Sharp–made LCD is installed] Stick two sponges along the guide of the display assembly.

[If LG Philips–made LCD is installed] Stick one gasket and two aluminum tapes along the guide of the display assembly.

9.Pass the wireless LAN antenna cables to the back side of the display assembly.

10.Install the LCD harness and LCD harness holder on it. Secure the plate with the following screw. When installing the LCD harness holder, hook the right projection to the edge of the chassis and secure the cable with the insulator.

• M2x4Z

SUPER THIN screw

x1

11. Install the right and left hinge caps and secure them with the following screws.

• M2.5x6B

THIN BIND screw

x2

12.Pass the wireless LAN antenna cable to the back side of the base assembly and arrange them along the guides. Pass the cables to the center of the base assembly.

4-70

[CONFIDENTIAL]

Satellite A50S/TECRA A3X Maintenance Manual (960-534)

Page 292
Image 292
Toshiba A3X manual Replacement Procedures Wireless LAN Antenna/Speaker/Hinge