4.9 Switch membrane board

4 Replacement Procedures

Installing the Switch membrane board

The following describes the procedure for installing the switch membrane board (See Figure 4-20).

1.Place the switch membrane board to the left side of the installation position and slide it to the right to install. Then fix it with the following screw.

M2.5x2.8B THIN BIND screwx1

2.Connect the switch membrane board cable to the connector CN3280 on the system board.

Satellite A50S/TECRA A3X Maintenance Manual (960-534)

[CONFIDENTIAL]

4-31

Page 253
Image 253
Toshiba A3X manual Switch membrane board Replacement Procedures, Installing the Switch membrane board