3 Tests and Diagnostics

3.31 SETUP

14.Peripheral

Use this option to select the peripheral's mode.

(a)Internal Pointing Device

This option enables or disables the touch pad

Enabled

Enables the touch pad. (Default)

Disabled

Disables the touch pad.

(b)Ext Keyboard "Fn"

This option enables or disables Fn key function on the external keyboard.

Enabled

Enables the feature.

Disabled

Disables the feature. (Default)

When “Enabled” is selected, the following sub-window appears.

KEYBOARD

Ext Keyboard "Fn" key equivalent

= Left Ctrl + Left Alt

Use this option to set a key combination on an external keyboard to emulate the Fn key on the computer's internal keyboard. Setting a Fn key equivalent will enable you to use “Hotkeys” by pressing the set combination in place of the Fn key. The following items can be selected for this option:

=Left Ctrl + Left Alt (*1)

=Right Ctrl + Right Alt (*2)

=Left Alt + Left Shift

=Right Alt + Right Shift

=Left Alt + Caps Lock

NOTE: If these selections ((*1) or (*2)) are made, you cannot warm boot the system by pressing Ctrl + Alt + Del.

(c)Parallel Port Mode

Use this option to set information of Parallel Port Mode.

ECP

Sets the port mode to Extended Capabilities Port (ECP).

 

For most printers, the port should be set to ECP. (Default)

Std. Bi-Direct.

Sets the bi-directional setting. This setting should be used

 

with some other parallel devices.

Satellite A50S/TECRA A3X Maintenance Manual (960-534)

[CONFIDENTIAL] 3-105

Page 215
Image 215
Toshiba A3X manual Ecp