4.4 MDC 4 Replacement Procedures
Satellite A50S/TECRA A3X Maintenance Manual (960-534) [CONFIDENTIAL] 4-15
Installing the MDC
The following describes the procedure for installing an MDC(See Figure 4-5).
1. Connect the MDC cable to the connector JP1 on the MDC.
2. Set the MDC on the slot and connect the MDC to the connector CN3020 on the
system board by pressing it from the top.
3. Fix the MDC using the following screws.
• M2x4Z BIND screw x2
4. Install the MDC slot cover and secure it with the supplied screw.