Toshiba A3X manual Installing the S-Video board

4.13 Parallel port board / Serial port board / S-Video board 4 Replacement Procedures

Installing the S-Video board

The following describes the procedure for installing the S-Video board (See Figure 4-27, 4- 30).

1.Install the serial port board on the base assembly.

2.Connect the USB harness to the connector PJ4610 and the S-Video harness to the connector PJ5640 on the S-Video board.

3.Pass the DC-IN harness, USB harness and S-Video harness along the guide of base assembly.

CAUTION:Pass the cables under harness holder as the following figure.

DC-IN harness

USB harness

S-Video harness

4. Install the harness holder and secure it with the following screws.

• M2.5x4B THIN BIND screw x2

5.Set the core of the DC-IN harness on the harness holder and install the DC-IN jack in the slot of the base assembly.

Satellite A50S/TECRA A3X Maintenance Manual (960-534) [CONFIDENTIAL] 4-45