4 Replacement Procedures

4.6 Wireless LAN card

3.Disconnect two wireless LAN cables from connectors on the wireless LAN card.

4.Peel off one glass tape and two insulators remove the cables from the guide.

5.Open the left and right latches holding the wireless LAN card and remove the wireless LAN card.

Insulator

Glass Tape

Guide

Wireless LAN Antenna Cable

 

Insulator

Wireless LAN card

Figure 4-10 Removing Wireless LAN card

Installing the Wireless LAN card

The following describes the procedure for installing a wireless LAN card (See Figure 4-9, 4- 10).

1.Insert the wireless LAN card terminals at 45-degree slant into the connector on the computer and press the wireless LAN card from the top to secure.

2.Pass the black and white wireless LAN cables along the guide and secure them with one glass tape and two insulators.

3.Connect the wireless LAN cables to the connectors on the wireless LAN card. (White cable = MAIN, Black cable = AUX)

4.Attach the mini PCI slot cover and secure it with the following screw.

• M2x4B BIND or LH STICK

x1

4-20

[CONFIDENTIAL]

Satellite A50S/TECRA A3X Maintenance Manual (960-534)

Page 242
Image 242
Toshiba A3X manual Replacement Procedures Wireless LAN card, Installing the Wireless LAN card