4.3 Memory Module

4 Replacement Procedures

4.3Memory Module

CAUTION:The power of the computer must be turned off when you remove the memory module. Removing a memory module with the power on risks damaging the module or the computer itself.

Do not touch the memory module terminals. Any dirt on the terminals may cause memory access problems.

Never press hard or bend the memory module.

Removing the memory module

To remove a memory module, confirm that the computer is not in stanby mode or hibernation mode. Then perform the following procedure (See Figure 4-3, 4-4).

1.Turn the computer upside down.

2.Loosen the screw (with e-ring) securing the memory slot cover.

3.Remove the memory slot cover from the edge near the screw.

Memory Slot Cover

Screw with e-ring

Figure 4-3 Removing Memory Slot Cover

Satellite A50S/TECRA A3X Maintenance Manual (960-534)

[CONFIDENTIAL]

4-11

Page 233
Image 233
Toshiba A3X manual Memory Module Replacement Procedures, Removing the memory module