Toshiba A3X manual System Test Name

3.2 Executing the Diagnostic Test 3 Tests and Diagnostics

Select the option you want to execute and press Enter. When you select 1- SYSTEM TEST, the following message will appear:

SYSTEM TEST NAME XXXXXX

xxxxxxxDIAGNOSTIC TEST VX.XX [Ctrl]+[Break] ; test end

[Ctrl]+[C] ; key stop

SUB-TEST				: XX	ERROR COUNT: XXXXX
PASS		COUNT		: XXXXX
WRITE DATA				: XX	READ DATA	: XX
ADDRESS				: XXXXXX	STATUS	: XXX
SUB-TEST			MENU :
01	-	ROM	checksum
02	–	Fan	ON/OFF
03	-	Geyserville
04	-	Quick		charge
05	-	DMI	read
99	-	Exit to DIAGNOSTIC TEST MENU

NOTE: The menu displayed by your computer may be slightly different from the one shown above.

Select the desired subtest number from the subtest menu and press Enter. The following message will appear:

TEST LOOP : YES (or NO)

ERROR STOP : YES (or NO)

Use the right and left arrow keys to move the cursor to the desired option.

Selecting YES of TEST LOOP increases the pass counter by one, each time the test cycle ends and restarts the test cycle.

Selecting NO returns the process to the subtest menu after the test is complete.

3-6 [CONFIDENTIAL] Satellite A50S/TECRA A3X Maintenance Manual (960-534)