4 Replacement Procedures

4.9 Switch membrane board

4.9Switch membrane board

Removing the Switch membrane board

The following describes the procedure for removing the switch membrane board (See Figure 4-20).

1.Open the display and unlock the connector. Disconnect the switch membrane board cable from the connector CN3280 on the system board.

2.Remove the following screw securing the switch membrane board.

• M2.5x2.8B

THIN BIND screw

x1

3. Slide the switch membrane board to the left and remove it.

M2.5x2.8B THIN BIND

Switch membrane board

Switch membrane board Cable

CN3280

Figure 4-20 Removing Switch membrane board

4-30

[CONFIDENTIAL]

Satellite A50S/TECRA A3X Maintenance Manual (960-534)

Page 252
Image 252
Toshiba A3X manual Replacement Procedures Switch membrane board, Removing the Switch membrane board