2.4 System Board Troubleshooting

2 Troubleshooting Procedures

Check 3 The IRT checks the system board. When the IRT detects an error, the system stops or an error message appears.

If one of the following error messages (1) through (17), (23) or (24) is displayed, go to Procedure 4.

If error message (18) is displayed, go to the Keyboard Troubleshooting Procedures in Section 2.7.

If error message (19), (20) or (21) is displayed, go to the 2.5” HDD

Troubleshooting Procedures in Section 2.6.

(1)PIT ERROR

(2)MEMORY REFRESH ERROR

(3)TIMER CH.2 OUT ERROR

(4)CMOS CHECKSUM ERROR

(5)CMOS BAD BATTERY ERROR

(6)FIRST 64KB MEMORY ERROR

(7)FIRST 64KB MEMORY PARITY ERROR

(8)VRAM ERROR

(9)SYSTEM MEMORY ERROR

(10)SYSTEM MEMORY PARITY ERROR

(11)EXTENDED MEMORY ERROR

(12)EXTENDED MEMORY PARITY ERROR

(13)DMA PAGE REGISTER ERROR

(14)DMAC #1 ERROR

(15)DMAC #2 ERROR

(16)PIC #1 ERROR

(17)PIC #2 ERROR

(18)KBC ERROR

(19)HDC ERROR

(20)HDD #0 ERROR

(21)HDD #1 ERROR

(22)TIMER INTERRUPT ERROR

(23)RTC UPDATE ERROR

Satellite A50S/TECRA A3X Maintenance Manual (960-534)

[CONFIDENTIAL]

2-17

Page 73
Image 73
Toshiba A3X manual KBC Error HDC Error