3.30 Sound Test program

3 Tests and Diagnostics

Subtest02

Sine Wave

 

 

This subtest is executed by loading the COM file (ADSIN.COM). The

 

program expands sine wave data table from 16KB to 64KB, and creates the

 

play data. Then it transfers the data between the DMA and the CODEC to

 

play the sine wave. (It sounds like a continuous beep). By using wave

 

measurable devices such as an oscilloscope, the data can be measured as a

 

sine wave.

 

 

When the subtest is executed, the sine wave is played while expanding sine

 

wave from 16KB to 64KB.

 

 

The display returns to the Sound (Standard) test menu after the test ends.

Subtest03

Line IN recording & play

 

 

This subtest executes the same test as the subtest01 by recorded sound from

 

the different port (Line-in port).

 

For more details on the subtest, refer to the subtest01 Microphone recording & play.

The display returns to the Sound (Standard) test menu after the test ends.

3.30.2 Sound (Legacy) test

To execute the Sound (Legacy) test, select 2 and press Enter.

CAUTION: Sound (Legacy) test is not supported in this model.

3-86

[CONFIDENTIAL]

Satellite A50S/TECRA A3X Maintenance Manual (960-534)

Page 196
Image 196
Toshiba A3X manual Sound Legacy test