Toshiba A3X manual Removing the bracket, Installing the Optical drive

4.10 Optical Drive				4 Replacement Procedures
3.	Remove the following screws fixing the rear bracket from the optical drive assembly.
	•	M2x2.7	STEP screw	x2
4.	Remove the following screw fixing the side bracket and remove the side bracket.
	•	M2x3S	SUPER THIN BIND screw	x1
				optical drive assembly
	Side Bracket

Rear Bracket

M2x3S SUPER THIN BIND	M2x2.7 STEP
Figure 4-22 Removing the bracket

Installing the Optical drive

The following describes the procedure for installing the optical drive (See Figure 4-21, 4-22).

1.	Install the side bracket on the optical drive and fix it with the following screw.
	•	M2x3S	SUPER THIN BIND screw	x1
2.	Place the rear bracket on the optical drive and fix it with the following screws.
	•	M2x2.7	STEP screw	x2

3.Insert the optical drive assembly into the slot to connect it to the connector CN1810 on the system board.

4.Secure the optical drive assembly with the following screw from the bottom of the computer.

• M2.5x6B THIN BIND screw x1

Satellite A50S/TECRA A3X Maintenance Manual (960-534) [CONFIDENTIAL] 4-33