Problem/Message | Possible Solution | |||
|
|
| ||
|
|
| ||
Printer indicates NOT | 1. | Check that the: | ||
FOUND on the Device | • Ethernet cable is connected to the | |||
Health Check Screen | ||||
|
| printer. | ||
(Ethernet Connection). |
|
| ||
• APEX processor is connected to the | ||||
| ||||
|
|
| network. | |
| 2. | Touch: | ||
| • | [Setup] | ||
| • | [Manage Devices] | ||
| • [KODAK DL2100 Duplex Printer] | |||
| 3. | Check that you can see a printer when | ||
|
| you select [Search for Printers]. | ||
| 4. If a printer (s) is found, touch next to the | |||
|
| default printer and select [Save]. | ||
| 5. | If you are unable to find your printer via | ||
|
| the search: | ||
| • | Touch [Manually Configure]. | ||
| • Enter the IP address of the printer. | |||
| • | Touch [Test Connection]. | ||
| 6. If a connection is found, touch [Save]. | |||
| 7. | If the connection is still not found, have | ||
|
| your system administrator check the | ||
|
| Network Settings in the | ||
|
| Requirements for the KODAK DL2100 | ||
|
| Duplex/Network Printer. | ||
| 8. If the problem persists, contact KODAK | |||
|
| Service and Support. | ||
|
|
|
| |
28
