Replacing the Image Drum
The printer contains four image drums: cyan, magenta, yellow, and black.
1.Make sure that you have a sheet of paper on which to place the old image drum.
2.Open the top cover.
Caution!
The fuser becomes extremely hot during normal operation. Do not touch it.
The surface of the green image area of the drum is delicate and light sensitive. Do not touch it, and do not expose it to normal room light for more than 5 minutes. If the drum needs to be out of the printer for more than 5 minutes, wrap the drum inside a black plastic bag to protect it from light. Never expose the drum to direct sunlight or bright room lighting.
3.Hold the center of the toner cartridge/image drum and lift it out of the printer.
4.Place the toner cartridge/image drum on a sheet of paper.
5.Lift the toner release lever.
6.Hold the right end of the cartridge and carefully lift it out of the drum assembly.
Important!
Avoid spilling toner. Do not shake or jar the toner cartridge.
7.Place the toner cartridge on a sheet of paper.
8.Remove the packaging from the new image drum. Place the image drum on a sheet of paper.
9.Place the old image drum inside the packaging material.
12
