- 4-
Operating positions
Important: Only operate the appliance when
accessories are attached and in the operating
positions shown in this table. NEVER operate the
appliance without ingredients.
Working with kneading hooks,beaters and whisks
Note: The appliance may only be used when
the drive openings not being utilised are
covered with drive protection lids.
Position Accessories
1
2
3
4Positioning of the mixing bowl
Utilisation of kneading hooks,
beaters and whisks
5Insertion of large amounts to be
processed
To prepare the appliance for work with kneading
hooks q, beaters eand whisk w, proceed as
follows:
• Press the unlocking button fand bring the swivel
arm hinto operating position 4 (see chapter
„Operating positions“) (Fig. 1).
• Insert the mixing bowl y. The base of the mixing
bowl ymust engage in the recesses kon the
appliance.
• Press the unlocking button fand bring the swivel
arm hinto operating position 1 (see chapter
„Operating positions“) (Fig. 1).
• Place and hold turn-switch gin position P, until
the drive motor jremains stationary in the park
position (Fig. 2). Should the drive motor not
move it is already at the park position.
• Press the unlocking button fand bring the swivel
arm hinto operating position 4 (see chapter
„Operating positions“) (Fig. 1).
• Depending on the task to be performed, insert
the kneading hooks q, beaters eor whisks wso
that they firmly engage in the drive jmotor.
Note: The kneading hooks qare fitted with a
pastry deflector. Turn the pastry deflector until the
kneading hooks qcan engage (Fig. 3).
• Place the ingredients to be processed into the
mixing bowl y.
Note:Pay heed that during the kneading
and/or mixing process the pastry in the mixing
bowl increases in volume, or is pressed upwards
through the rotary movement. Take note of the
table in the chapter „Recommended filling
quantities“.
• Press the unlocking button fand bring the swivel
arm hinto operating position 1 (see chapter
„Operating positions“) (Fig. 1).
• Place the lid onto the mixing bowl y.
• Set the rotary switch gto the desired level.
IB_KH701_E23295_LB6 25.07.2008 10:14 Uhr Seite 4