Kompernass KH 2236 operating instructions Adjusting Alarm-Timings, Switching the Alarm on

•Select the radio wavelength by me- ans of the AM/FM wave band selec- tor f.

•Now select the desired transmitter through turning the tuning knob s.

Note:

To improve the reception of transmit- ters in the FM range slowly move the end of the wire aerial in various direc- tions. When you have found the best reception for the desired transmitter, fix the wire aerial into this position

e. g. with adhesive tape. For the re- ception of AM transmitters, an aerial is built into the appliance. For impro- ved reception, alter the position of the appliance in radio mode.

Adjusting Alarm-Timings

If the clock is set correctly, as described above:

Whilst pressing and holding down the button ALARM e:

•Press several times in succession, or simply press and hold the button HOUR q, to adjust the hour setting.

•Release the button HOUR q, as soon as the desired hour setting appears in the display i.

•Press several times in succession, or simply press and hold the button MIN w, to adjust the minute setting.

•Release the button MIN w as soon as the desired minute setting appears in the display i.

The adjusted time will be automatically accepted as soon as the button ALARM e is released.

Switching the Alarm ON

If the clock and alarm time are set correctly, as described above:

•Push the slider switch o into the posi- tion AUTO. The alarm is now switched on. For control purposes, a point appears to the left in the display i.

You will be woken by the radio if ...

•the volume controller VOLUME d is set to a level high enough to awaken you.

You will be woken by the signal tone if ...

•the volume controller VOLUME d is turned down so far that it switches off with an audible click, i. e. it is in the position BUZZ.

- 7 -