Introduction / Safety
Cordless hand vacuum cleaner KH 280
Introduction
Dear Customer,
Our products are designed to fulfil the highest demands of quality, functionality and design. We hope that you will be delighted with your new “Lervia” blender.
Use according to purpose
Use the rechargeable vacuum cleaner to vacuum dry surfaces or dry vacuum material only. Man or animal must not be vacuumed with this device.
Any use or modification of the device other than intended is not in accordance with the specified purpose and poses a substantial accident risk.
The manufacturer is not liable for damage caused by application which is not in compliance with the specified purpose or which caused by improper operation.
Not suitable for industrial application.
Description of components
QFront nozzle/dust container
WDust filter
EDust container release button
RBattery capacity indicator
TCharging indicator
YOn/off switch
UHousing
Icharging station
OAC mains adapter
PCrevice tool
6 GB / IRL
{Small brush
}Battery compartment lid
Note: The KH 280 cordless rechargeable hand vacuum cleaner is supplied with the batteries in the uncharged state.
Before using the appliance for the first time charge the batteries for 24 hours.
Technical Information
Nominal voltage: 230 V~ 50 Hz (power pack)
Rating:Direct Current (DC),
6 V / 4.2 Ah (accumulator)
Safety
Important notes on safety
To prevent danger to life from electric shock:
·Do not charge or use this device outdoors.
·Never use the hand vacuum cleaner if cables, the plug or the casing are damaged.
·Send defective devices to the respective serv- ice point or have a specialised workshop carry out repairs. Never open the device. Any ma- nipulation performed other than by an author- ised service point may prove hazardous to your health.
·Before switching on the vacuum cleaner, be sure that the voltage as indicated in the technical information of the device complies with the supply voltage.
·Never touch the plug or the device with wet or damp hands.
·Do not use the power pack with an extension cord. Connect the power pack directly with
