To change the fuse proceed as follows:
•Open the cover of the fuse holder and pull the automotive flat fuse out of the holder.
Diagram: Changing the cable fuse
•Place a new 30 A automotive flat fuse (supplied) into the two connections and put the cover back on the fuse holder.
Handling general failures
Electrical tools
•When an electrical tool will not switch on or only runs for a short time switch the power inverter on and off several times while the electrical tool is switched on.
Television sets
•The power inverter is shielded and puts out a filtered sine wave.
With the reception of, for example, very weak television stations it can, nevertheless, result in interferences and/or image breakdown.
•In this case position the power inverter as far away as possible from the television, antenna cable and antenna.
•Reposition the power inverter, television, antenna cable and antenna until reception improves.
•If possible use a high quality, shielded antenna cable.
Audio systems
•Some audio/video systems issue a buzzing tone through the speaker when they are being operated via the power inverter. The reason for this is that these devices can not filter the modified sine wave of the power inverter and this is not a defect in the power inverter.
- 8 -
