Lay the material for a trial run under the sewing foot o and slowly start to sew.

The material will be automatically fed through.

Setting the thread tension

The thread tension required is variable, being depen- dant itself on the type and thickness of the thread and fabric.

Check the seams and then adjust the appropriate thread tension on the machine.

Tensioning the thread

When you turn the tensioning device to a lower number, the tension reduces.

When you turn the tensioning device to a higher number, the tension increases. The wheels of the tensioning device have the following colours:

When the task is complete, continue sewing until an approximately 5cm (2") long length of threads has formed at the end of the material.

Cut through the threads with scissors.

red

yellow

green

blue

Correct thread tension:

Thread, right needle

Reverse

Thread, left needle

lower looper thread

upper looper thread

- 10 -

Page 12
Image 12
Kompernass KH 4300 manual Setting the thread tension, Cut through the threads with scissors