Bobbin caps
If using
Safety switch
This machine is fitted with a micro safety switch. You cannot start the machine if the front flap 8 is open. Close the front flap 8 before you start to sew.
Connecting the foot pedal
Insert the plug of the footpedal g into the connection for the footpedal 5 and the power plug j into a mains power socket.
To switch the machine on, press the power switch 7.
Attention!
During absences from the machine or when doing maintenance work, always remove the plug j from the mains power socket. Injury hazard!
Controlling the sewing speed
The sewing speed is controlled by means of the footpedal h. The sewing speed is changed by ap- plying more or less pressure to the footpedal h.
Fitting the waste container
The waste container k collects remnants during sewing, so that your workplace stays tidy. Place the waste container k between the machine and the table.
Handwheel
Note:
Always turn the handwheel 6 towards yourself, that is, in the same direction as with a domestic sewing machine.
Front flap
To open the front flap 8, slide it as far as possible to the right and, at the same time, draw it towards yourself.
- 6 -
