Description of the appliance
1 Thread tree
2 Thread tension selector (lower looper)
3 Spool support
4 Cold air intake
5 Connection Footpedal/Power supply
6Handwheel
7 Power switch (On/Off switch)
8 Front flap
9 Arm support
0 Free arm
q Thread tension selector (left needle) w Thread tension selector (right needle) e Thread tension selector (upper looper) r Thread guide
t Thread guide plate
z Adjustment wheel for stitch length
u Adjustment wheel for differential feed motion i Adjustment wheel for cutting width
o Sewing foot p Lower blade a Upper blade s Upper looper d Lower looper
f Release lever PUSH g Connection plug h Foot pedal
j Power plug
k Waste container
Preparation
Place the overlock sewing machine on a stable and level surface. Ensure there is sufficient illumination at your workplace.
Adjusting the thread tree
Completely withdraw the thread tree 1 before threading.
Turn the thread tree 1 so that the thread guides stand exactly above the spool supports 3.
Bobbin supports
Both industrial bobbins and household bobbins can be used with this machine.
For industrial bobbins with a large diameter place the bobbins supports in with the broad end to the top, for bobbins with a small diameter place the support in with the narrow end to the top.
- 5 -
